OVERVIEW
- 6 -
Ｍ ＋
Ｍ －
①
②
P O W E R
③
④
⑤
⑥
⑦
⑧
Ｈ
Ｌ
６ ５
Fig. 4 Rear panel of Meter rear panel
⑤ Setpoint output terminal
Outputs setpoint L.
⑥ Setpoint output terminal
Outputs setpoint H.
The recorder output is afloat from ground potential. Always connect the
recorder input to the recorder terminal by insulating it from ground. If it
is connected to GND potential by mistake, the meter will not indicate the correct
value. Also the vacuum gauge may be damaged.
To Next Page