UT131 Palm Size Multimeter
K-type Thermocouple ----------1 pc (UT131C only)
Warning:
Please carefully read “Safe Operation Rule” before using the device.
Ⅲ. Safe Operation Rule
1). Safety certification
This device strictly follows the CE standards: EN 61010-1: 2010, EN 61010-2-030:2010, EN
61326:2013, as well as CAT II: 250V, RoHS, pollution grade II, and double insulation standards.
2). Safety instructions and Precautions
1. Do not use the device if the device or test leads appear damaged or if you suspect that the
device is not operating properly. Pay particular attention to the insulation layers.
2. If the test leads are damaged, it must be replaced with one of the same type or the same
electrical specification.
3. When measuring, do not touch exposed wires, connectors, unused inputs, or the circuit being
measured.
To Next Page
Loading...
Need help?
General
