A Overload protection: 600V-PTC
6. Measuring of Capacitance
Overload protection: 600V-PTC
• For tested capacitance of ~ 1 μF, it is suggested to test under ZERO mode to ensure measuring accuracy.
7. Measuring of DC Current
Overload protection: 200A
• Due to existence of the earth and other magnetic fields, and in order to ensure the accuracy of measuring
readings, ZERO key shall be pressed before measuring.
8. Measurin of AC current
Overload protection: 200A
• Accuracy assurance range: 5-100% measuring range, with less than 20 residual counts allowable in case of
2A open circuit.
To Next Page
Loading...
Need help?
General
