UT219PV User Manual
26 / 27
XIV. Bluetooth Software
1. Introduction
The Bluetooth software is a mobile APP and supports iOS 10.0 or newer and Android 5.0 or newer
currently
2. Download iDMM2.0
① For Android
Method 1: Search “UNI-T Smart Measure” at “Google Play”.
Method 2: Turn on the scanning function of "Google Play", then scan the QR code below.
② For IOS
Method 1: Search "UNI-T Smart Measure" at "App Store".
Method 2: Turn on the scanning function of mobile phone, then scan the QR code below.
For Android For iOS
3. Use
3.1) Open the Bluetooth functions of both the Clamp Meter and mobile phone, tap the “UNI-T Smart
Measure” APP icon on your phone desktop to open the software, then the software enters the
navigation interface and searches nearby Bluetooth-enabled meters automatically. After that, select
the corresponding meter and make connection. Alternatively, scan the QR code at the meter to make
direct connection. In connected state, data communication, measurement result display, button
control and other operations can be achieved.
3.2) The “UNI-T Smart Measure” APP has multiple functions including Bluetooth communication, data
recording, device management, report generation, data sharing, data synchronizing, and more. For
To Next Page
Loading...
Need help?
General
