14
Model UT33A: OPERATING MANUAL
Measurement Operation (1)
Warning
To avoid harms to you or damages to the Meter
from electric shock, please do not attempt to
measure voltages higher than 500V although
readings may be obtained.
The DC Voltage ranges are : 400.0mV, 4.000V,
40.00V, 400.0V and 500V
1. Insert the red test lead into the VΩmA terminal
and the black test lead into the COM terminal.
2. Set the rotary switch to V range.
3. Connect the test leads across with the object being
measured.
The measured value shows on the display.
(figure 3)
A. DC Voltage Measurement (see figure 3)
black red
To Next Page
Loading...
