EasyManuals Logo

UNI-T UT33A User Manual

UNI-T UT33A
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
Model UT33A: OPERATING MANUAL
Warning
To avoid possible electric shock or personal injury, and to avoid possible
damage to the Meter or to the equipment under test, adhere to the following
rules:
l Before using the Meter inspect the case. Do not use the Meter if it is damaged
or the case (or part of the case) is removed. Look for cracks or missing plastic.
Pay attention to the insulation around the connectors.
l Inspect the test leads for damaged insulation or exposed metal. Check the
test leads for continuity. Replace damaged test leads with identical model
number or electrical specifications before using the Meter.
l Do not apply more than the rated voltage, as marked on the Meter, between
the terminals or between any terminal and grounding.
l The rotary switch should be placed in the right position and no any
changeover of range shall be made during measurement is conducted to
prevent damage of the Meter.
Rules For Safe Operation (1)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the UNI-T UT33A and is the answer not in the manual?

UNI-T UT33A Specifications

General IconGeneral
DC Voltage Range200mV/2V/20V/200V/500V
AC Voltage Range200V/500V
DC Current Range200μA/2mA/20mA/200mA/10A
Resistance Range200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ
DisplayLCD
Display Count1999
Diode TestYes
Continuity TestYes
Data HoldYes
Battery Test1.5V/9V
Battery Type9V (6F22)
Weight156g

Related product manuals