39
Model UT33A: OPERATING MANUAL
4. Remove the fuse by gently prying one end loose, and then take out the fuse
from its bracket.
6. Rejoin the case bottom and case top, and reinstall the screw.
Replacement of the fuses is seldom required. Burning of a fuse always results from
improper operation.
5. Install ONLY replacement fuses with the identical type and specification as
follows and make sure the fuse is fixed firmly in the bracket.
Fuse 1:500mA 250 V, fast type, f 5x20mm.
Maintenance(5)
To Next Page
Loading...
Need help?
General
