UNI-T UT593 - Page 7

UT593/595 OPERATING MANUAL UT593/595 OPERATING MANUAL
<Test indices for frequency of UT593/UT595>
20Hz~100Hz
1Hz
Only for reference
Measuring scope
Resolution
Precision
<Test indices for phase sequence rotation of UT593/UT595>
Three-phase AC voltage 100V~440V, frequency: 45Hz~65Hz;
As per the sequence: L1 L2 L3 foreword rotation;
L1 L3 L2 reversed rotation
Loss of any L1, L2 or L3 will be displayed on LCD.
Scope of applied voltage
Measuring result
Determination of phase loss
Display: Liquid-crystal display, the maximum reading displayed of 9999
Low battery level warning: Diagram of battery
Overrun indication: OL
Automatic range function
Unit display: It can display function and symbol of quantity of electric charge unit
Working conditions: 0 ~40 / relative humidity 85% or below
Storage conditions: -20 ~60 /relative humidity 90% or below
Physical dimension: 210mm (L)X 175mm (W) X 90mm (D)
Current consumption: About 50mA (at the maximum output of 1000V) (normally about 10 mA)
Attachments: Test line, alkaline battery 1.5V (5#) X 8 pieces, Users' Manual, portable bag
Weight 1kg (including battery)
Power supply alkaline battery 1.5V (5#) X 8 pieces
IV. FRONT VIEW AND UPPER SIDE VIEW OF THE INSTRUMENT
(SEE FIG. 1 AND FIG. 2)
(Fig. 1) (Fig. 2)
1. LCD display
2. Function key F1, F2, F3, F4
3. Test key
4. Rotary switch
5. Test input pen (black)
6. Test input pen (red) and special pen with TEST key
7. Test input pen (green)