UNI-T UT60C User Manual

, k ,
M
:
k
:
M
:
Ohm. The unit of resistance.
kilohm. 1 x 10
or 1000 ohms.
Megaohm. 1 x 10
or 1,000,000 ohms.
nF
F:
nF:
Farad. The unit of capacitance.
Microfarad. 1 x 10
or 0.000001
farads.
Nanofarad. 1 x 10
or 0.000000001
farads.
Hz,
kHz,
MHz
Hz:
kHz:
MHz:
Hertz. The unit of frequency in
cycles/second.
Kilohertz. 1 x 10
or 1,000 hertz.
Megahertz. 1 x 10
or1,000,000
hertz.
V, mV V:
mV
Volts. The unit of voltage.
Millivolt. 1 x 10
or 0.001 volts.
12~16
A, mA, A:
mA:
Amperes (amps). The unit of current.
Milliamp. 1 x 10
or 0.001 amperes.
Microamp. 1x 10
or 0.000001
amperes.
17
Indicates negative reading.
18
The input value is too large for the selected
range.
Measurement Ranges (1)
The Meter has both manual range and autorange options:
12
Display Symbols (1) (see figure 2)
A measurement range determines the highest value the Meter
can measure. Most Meter functions have more than one range.
See “Accuracy Specifications.”
A.Selecting a Measurement Range
Being in the right measurement range is important:
l If the range is too low for the input, the Meter displays to
indicate an overload.
l If the range is too high, the Meter will not display the most
accurate measurement.
B. Manual Ranging and Autoranging
Model UT60B/C/E: OPERATING MANUAL

UNI-T UT60C Specifications

General

Data hold	Yes
Product type	Digital multimeter
Frequency range	0.01 - 10000 kHz
AC current range	0.4 - 10 A
AC voltage range	4 - 750 V
DC voltage range	0.4 - 1000 V
Temperature measurement range	-40 - 1000 °C
Battery voltage	9 V
Dimensions (WxDxH)	85 x 177 x 40 mm

Weight and Dimensions

Weight	340 g