EasyManua.ls Logo

UNI EV Series User Manual

Default Icon
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operating and mounting manual (translation)
EV / EVF
_______________________________________________________________________________________________________
220.100.091-05 Page 1 /21 Version: 06/2017
TM 4474
Operating and mounting manual
Safety shut off valve solenoid valve
EV / EVF
Contents
1.0 General Remarks
1.1 Valve data
1.2 Application
2.0 Danger Notices
2.1 Safety terms
2.2 Safety notice
2.3 Qualified staff
2.4 Unauthorized modification and spare part production
2.5 Unauthorized operation
2.6 Safety information for the use in explosion-prone areas guideline 94/9/EC
3.0 Handling
3.1 Transport
3.2 Storage
3.3 Handling before mounting
4.0 Product Description
4.1 Function
4.2 Technical data
4.3 Marking
5.0 Installation
5.1 Warning of dangers during installation, operation and maintenance
5.2 Installation
6.0 Operation
6.1 Commissioning
6.2 Shutting down
6.3 Maintenance
6.4 Putting back into operating
7.0 Troubleshooting
7.1 Detection of defects
7.2 Troubleshooting plan
8.0 Dismantling of the Valve
8.1 Replacement of wear parts
9.0 Warranty
10.0 Explanations on Codes and Directives
11.0 Drawing
11.1 Sectional drawing
11.2 View drawing
11.3 List of parts
12.0 Declaration of Conformity
Question and Answer IconNeed help?

Do you have a question about the UNI EV Series and is the answer not in the manual?

UNI EV Series Specifications

General IconGeneral
BrandUNI
ModelEV Series
CategoryControl Unit
LanguageEnglish

Summary

General Remarks

Valve data

Provides technical specifications, manufacturer details, and series information for the valve.

Application

Details the intended uses, qualified fluids, and service life of the solenoid valves.

Danger Notices

Safety terms

Defines signal terms (DANGER, CAUTION, NOTICE) used for hazard communication.

Safety notice

Warns that non-observance of instructions can lead to damages or injuries.

Qualified staff

Specifies the required qualifications and training for personnel.

Unauthorized modification and spare part production

Prohibits modifications and unauthorized parts, voiding liability.

Unauthorized operation

Emphasizes operating within specified limits and application scope.

Safety information for explosion-prone areas

Provides safety guidelines for use in ATEX-classified explosion-prone zones.

Handling

Transport

Covers safe transportation practices, including temperature and handling precautions.

Storage

Details proper storage conditions, temperature, and environmental requirements.

Handling before mounting

Instructions for pre-installation handling, protection, and removal of covers.

Product Description

Function

Explains the working principle of the solenoid valve operation.

Technical data

Lists technical specifications like opening times, solenoid drive types, and pressure ratings.

Marking

Describes the information provided on the valve's type sign.

Installation

Warning of dangers during installation, operation and maintenance

Emphasizes critical safety warnings for correct installation and maintenance.

Installation

Provides specific installation guidelines and mounting position advice.

Operation

Commissioning

Outlines the necessary checks and procedures before initial operation.

Shutting down

Details the safe procedures for taking the valve out of service.

Maintenance

Recommends inspection intervals and overhaul procedures for longevity.

Putting back into operation

Steps for safely recommissioning the valve after downtime or repairs.

Troubleshooting

Detection of defects

Guides users on identifying malfunctions and verifying installation data.

Troubleshooting plan

A table listing common problems, causes, and their corresponding remedies.

Dismantling of the Valve

Replacement of wear parts

Instructions for disassembling the valve to replace worn components.

Warranty

Explanations on Codes and Directives

Drawing

Fig. 1 100-EVF... (G1/2 – G3/4)

Provides a sectional view and component identification for a specific valve model.

View drawing

Presents various dimensional views and external diagrams of valve models.

List of parts

A comprehensive list of valve components with item numbers and descriptions.

Declaration of Conformity