Need help?Do you have a question about the Unic Pony 4 and is the answer not in the manual?
General| Brand | Unic |
|---|---|
| Model | Pony 4 |
| Category | Coffee Maker |
| Language | English |
Handle E.S.E. pods carefully, avoiding tears or crushing for optimal brewing.
Insert pod, place cup, and select pour volume for single shots.
Brew a double shot by inserting pods into both available slots.
Fill pitcher with milk, ensuring steam wand tip is submerged correctly.
Use SteamAir button and adjust collar for desired air content in milk.
Wipe and purge steam wand after each use to prevent milk build-up.
Drawer icon turns red and screen flashes 'dF' when the waste drawer is full.
Remove the drawer for 8 seconds for automatic counter reset.
Monitor drawer status via icon color changes and screen messages.
Gather cleaning tablets, holders, and spout funnel for the automatic cycle.
Initiate cycle via button press, insert holders, and let the machine run.
Remove inserts, empty the drawer, and clear the display after cycle.
Clean steam tip daily or if steam leaks from the wand.
Turn off machine, unscrew tip, remove outer wand, and probe.
Wipe wand parts and clean tip holes; reassemble carefully.
Program volumes for hot water and time for manual steam.
Customize single and double shot coffee volumes for preferred taste.
Exit programming mode and save changes by powering off the machine.
Configure the cleaning alert frequency based on drink count for maintenance.
Understand codes like 'cL', 'to', 'dF', 'dA', 'PE', 'dE' for status.
Interpret 'FL', 'FE' for filling status and '99' for probe issues.
Address 'cL' (cleaning required) and 'to' (top cover open) errors.
Troubleshoot 'dF' (drawer full) and 'dA' (drawer absent) messages.
Resolve 'PE' (pod error) by cleaning sensors and checking pods.
Diagnose 'dE' (dose error) and 'G1' (group operation) issues.
Handle 'FE' (filling error) and '99' (steam probe) faults.
Check power settings for cold coffee or no steam issues.
Steps to remove jammed pods and clean the brewing group.
Emergency overrides for 'PE' (pod error) and 'dA' (drawer absent) messages.
List of cleaning tablets and related accessories for maintenance.
Details on essential parts like spout funnel and steam tip.
To Next Page
