Unical IDEA CS 24 - Technical Data Plate

7
General information
ENGLISH
1.6 - TECHNICAL DATA PLATE
CE marking
The CE marking certies that the boilers meet:
- The essential requirements of the gas appliance
directive (directive 2009/142/EEC)
- The essential requirements of the electromagnetic
compatibility directive (2004/108/EEC)
- The essential requirements of the efciency di-
rective (92/42/EEC)
- The essential requirements of the efciency di-
rective (directive 2006/95/EEC)
KEY:
1 = CE monitoring body
2 = Type of boiler
3 = Boiler model
4 = Number of stars (directive 92/42 EEC)
5 = (S.N°) Serial Number
6 = P.I.N.ProductIdenticationNumber
7 = Typesofapproveduegasexhaustcongurations
8 = (NOx)NOxClass
A = Heatingcircuitcharacteristics
9 = (Pn) Effective nominal output
10 = (Pcond) Effective output in condensation
11= (Qmax)Maximumheatoutput
12= (AdjustedQn)Adjustedforratedheatoutput
13= (PMS)Max.heatingoperatingpressure
14= (Tmax)Max.heatingtemperature
B = Domestichotwatercircuitcharacteristics
15= (Qnw)Ratedheatoutputindomestichotwaterfunction
(if different to Qn)
16= (D)SpecicD.H.W.owrateaccordingtoEN625-EN
13203-1
17= (Rfactor)No.oftapsaccordingtothedeclaredamountof
water(EN13203-1)
18= (Ffactor)No.ofstarsaccordingtothedeclaredqualityof
thewater(EN13203-1)
19= (PMW)Max.domestichotwateroperatingpressure
20= (Tmax)Max.domestichotwatertemperature
C = Electricalcharacteristics
21= Electricalpowersupply
22 = Consumption
23 = Protection rating
D = Countries of destination
24 = Direct and indirect countries of destination
25 = Gas category
26 = Supply pressure
E = Factory settings
27 = Adjusted for gas type X
28 = Space for national brands
The technical data plate is located
inside the boiler on the back at the
bottom