12
TORQUE CONVERTER OIL LEVEL
Remove the oorboard.
Remove the oil dipstick of the ller cap. Clean the rod
with a clean cloth and reinstall it.
Remove the dipstick again and check the oil level.
The oil level should be within the specied range. If the
level is low, add oil.
13
MASTER CYLINDER FLUID LEAKAGE
Check the master cylinder and brake piping for fluid
leaks.
14
LOAD BACKREST
Check the load backrest for deformation, cracks or
damage or loose or missing mounting bolts.
Retighten where needed.
15
FORKS AND FORK STOPPERS
Check that the fork stoppers are properly engaged,
the fork lock bolt at the middle of the carriage is not
damaged, the forks are not bent and do not have
cracks.
FILLER CAP
OIL LEVEL
DIPSTICK
LOAD
BACKREST
FORK
STOPPERS
FORK
LOCK BOLT
4-11
PREOPERATIONAL CHECKS
To Next Page
Loading...
