To Next PageTo Next PageWhat to do if my Uniden BC 235XLT Radio has improper reception?
To troubleshoot improper reception on your Uniden Radio, check the antenna connection, and reposition the antenna. Try moving the scanner to a different location. If you are in a remote area, you might need an optional multi-band antenna.
How to fix Uniden BC 235XLT scanner that won’t work?
If your Uniden Radio scanner won’t work, verify the connections at both ends of the AC adapter. Ensure that the wall switch for the outlet is turned on. Try moving the AC adapter to a different outlet or replacing the batteries.
What to do if Uniden BC 235XLT scan won’t start?
If your Uniden Radio scan won’t start, try pressing the key again and adjusting the SQUELCH control. Also, check to see if all channels are locked out.
Why won't my Uniden BC 235XLT Radio scan stop?
If your Uniden Radio scan won’t stop, try these steps: adjust the squelch threshold, check the antenna connection, and ensure that not too many channels are locked out. Also, review each channel’s frequency to make sure it is correctly stored in memory. It’s also possible that none of the programmed frequencies are currently active.
What to do if Weather Scan won’t work on Uniden BC 235XLT Radio?
If the Weather Scan on your Uniden Radio isn't working, try adjusting the squelch threshold. Also, check the antenna connection.
General| Channels | 200 |
|---|---|
| Modulation Types | AM, FM |
| Bands | VHF, UHF |
| Step Size | 5, 12.5 kHz |
| Antenna | Telescopic |
| Battery | 6 AA batteries |
Details the process of inserting batteries into the scanner, including switch settings for battery types.
Explains how to use the AC adapter for powering the scanner and its charging capabilities.
Instructions for properly attaching the flexible antenna to the scanner's BNC connector.
Guides on adjusting the squelch control to filter out noise and receive clear signals.
Explains how to lock and unlock the keypad to prevent accidental key entries during scanning.
Details how to select and designate a different channel as the priority channel.
Guides on defining specific frequency ranges for personal chain searches.
