To Next PageTo Next PageHow to improve the reception on my Uniden BC 245XLT?
If you are experiencing improper reception on your Uniden Radio, try the following: * Check the antenna connection, reposition, or move the antenna. * Move the scanner to a different location. * If you are in a remote area, you might need an optional multi-band antenna. Consult your dealer or a local electronics store.
What to do if my Uniden BC 245XLT Radio scanner won't work?
If your Uniden Radio scanner isn’t working, try these steps: 1. Check the connections at both ends of the AC adapter. 2. Ensure the wall switch for the outlet is turned on. 3. Try a different wall outlet for the AC adapter, or replace the battery pack.
Why is the weather scan not working on my Uniden BC 245XLT Radio?
If the weather scan is not working on your Uniden Radio, try these steps: 1. Adjust the squelch threshold. 2. Check the antenna.
Why are the Channel Activity Indicators flashing but no sound is heard on my Uniden Radio?
If the Channel Activity Indicators are flashing on your Uniden Radio but you hear no sound: * It may be a private or telephone interconnect call, which are intentionally blocked by your scanner. * The ID in your display might not be active.
Why won't the scan stop on my Uniden BC 245XLT?
If the scan on your Uniden Radio won’t stop, here are some things you can check: 1. Adjust the squelch threshold. 2. Verify the antenna connection. 3. Make sure that not too many channels are locked out, as this reduces the scanner's ability to find an active channel. 4. Review each channel’s frequency to ensure it is correctly stored in memory. 5. Consider that none of the programmed frequencies might be currently active.
What to do if the scan won't start on my Uniden Radio?
If the scan function on your Uniden Radio isn't starting, try the following: * Press the key again. * Adjust the SQUELCH control. * Check to see if all channels are locked out.
Why won’t my Uniden BC 245XLT scanner track the trunked system?
If your Uniden Radio scanner isn’t tracking the trunked system, it could be due to the following reasons: * The system may not be trackable by your scanner. * The data frequency might be missing. * You may need to change to a Type 1 Scanner setup.
What to do if my Uniden BC 245XLT scanner will not acquire a data channel?
If your Uniden Radio scanner will not acquire a data channel: 1. Adjust the squelch for trunking mode. 2. Ensure that you are not missing the frequency used for the data channel. Check your frequency list.
Why is my Uniden BC 245XLT Radio scanner not tracking an EDACS system properly?
If your Uniden Radio scanner is not tracking an EDACS system properly: * Ensure logical channel numbers (frequencies) for the system are programmed in the correct order. Check frequency resources and reprogram. * Verify that all frequencies for the system are programmed. Check frequency resources.
Why am I missing replies to conversations on my Uniden Radio?
If you are missing replies to conversations on your Uniden Radio, you can try the following: * Change to a Type 1 Scanner setup. * Try another Preset Fleet Map or Program your own Fleet Map. * Check that all of the system's frequencies have been entered.
Introduces trunking systems and how the scanner monitors them.
Detailed steps for correctly installing the battery pack.
Steps to power on the scanner and initiate scanning.
Guide to adjusting the squelch control for optimal reception.
How to define the frequency limits for a search.
Details on how Type I systems are structured and programmed.
General| Type | Handheld Scanner |
|---|---|
| Channels | 300 |
| Weight | 10 oz |
| Priority Channels | Yes |
| Scanning | Yes |
| Memory Banks | 10 |
| Modulation Types | AM, FM |
| Memory | 200 channels |
| Power Source | Battery or AC Adapter |
| Dimensions | 2.7" x 5.5" x 1.5" |
