Uniden BC 350C - User Manual

Questions and Answers

R
Robin MartinJul 25, 2025
How to troubleshoot a Uniden BC 350C that won’t work?
- H
  harrisamberJul 26, 2025
  If your Uniden Scanner isn’t working, try these steps: First, check the AC adapter connections at both ends. Then, ensure the outlet isn't controlled by a wall switch, and if it is, try a different outlet. Also, check the DC cord or cigarette lighter cord connections. Verify that the fuse isn't blown and, if using in a vehicle, make sure the ignition key is in the Accessory position. Finally, confirm that the power switch is turned on.
N
Nicole JonesJul 30, 2025
What to do if my Uniden BC 350C scan won’t stop?
- G
  garrisoncliffordJul 30, 2025
  If your Uniden Scanner won’t stop scanning, you can try the following: First, check and adjust the Squelch. Then, check the antenna connection. Ensure that not all channels are locked out. It's also possible that none of the programmed frequencies are active at the moment, so try the band search.
C
Carlos ButlerAug 3, 2025
Why is my Uniden Scanner having improper reception?
- C
  courtneycervantesAug 3, 2025
  If you are experiencing improper reception on your Uniden Scanner, check the antenna and its connection. Try moving the scanner to a different location. If you are in a fringe area, you might need an optional multi-band antenna.
R
Robert SmithAug 8, 2025
What to do if weather scan won't work on Uniden BC 350C Scanner?
- J
  Julia LoveAug 8, 2025
  If the weather scan is not working on your Uniden Scanner, try these steps: Adjust the Squelch Control. Check the Antenna Connection. Review each channel's frequency to ensure it is still stored in memory and is correct.
N
Nichole EricksonAug 12, 2025
What to do if my Uniden Scanner scan won’t start?
- R
  Robert SanchezAug 12, 2025
  If your Uniden Scanner won’t start scanning, try pressing the bank key again. Also, adjust the Squelch Control. If you are using the Private bank, ensure that you have programmed frequencies into the bank before attempting to use it.
T
Theresa VillarrealAug 16, 2025
What to do if search won’t start on Uniden BC 350C?
- A
  andrea91Aug 16, 2025
  If the search function on your Uniden Scanner won’t start, adjust the Squelch Control and check the antenna connection.
H
holtaprilAug 20, 2025
Why PROGRAM key won’t work on Uniden Scanner?
- M
  Molly HernandezAug 20, 2025
  If the PROGRAM key on your Uniden Scanner isn’t working, ensure that scan or search is stopped first. Also, check if the MEMO LOCK Switch is ON.