86
1. Or, quickly press Hold to hold on the channel. Press L/O to toggle ‘Unlocked’,
‘Temporary L/O’, or ‘Lockout’.
2. Or, quickly press E/yes to go to the menu for that channel. (Press .no to
cancel storing a tone code if asked).
3. Scroll to ‘Set Lockout’ and press E/yes.
4. Scroll to ‘Unlocked’, ‘Temporary L/O’, or ‘Lockout’ and press E/yes.
5. Or, use Menu to drill down to the channel options and lock it out there. See
‘Edit Channel Options’.
To Unlock a Single Channel in Scan Mode press HOLD to hold on any channel.
Press Func and quickly (within 3 seconds) scroll to the system that has the channel
you want to unlock then quickly (within 3 seconds) press E/yes.
Scroll to the channel you want to unlock and press L/O until ‘Unlocked’ is displayed.
Or, use Menu to drill down to the channel options and unlock it there. See ‘Edit
Channel Options’.
To Unlock All Channels in a Conventional System in Scan Mode:
1. Press Hold to hold on any channel in the system.
2. Press and hold L/O until ‘All Unlocked’ appears.
3. Press Hold or Scan/Srch to resume scanning.
Note: This will also enable all your groups (turn the quick keys on).
To Review and/or Unlock Locked out IDs in a System:
1. Press Menu. At ‘Program System’ press E/yes.
2. At ‘Select System’ scroll to the system that has the ID(s) you want to unlock
and press
E/yes.
3. Scroll to ‘Edit Sys Option’ and press E/yes.
4. Scroll to ‘Rvw ID:Srch L/O’ and press E/yes.
5. At ‘Unlock?’ scroll to the ID and press E/yes to unlock.
6. ‘Nothing Locked’ appears if nothing is locked out.
7. Press Menu to return.
To Unlock All IDs in a System Scroll to ‘Clr All L/O IDs’ and press E/yes. At ‘Confirm?’
press E/yes to save and exit.
To Next Page