Need help?Do you have a question about the Uniden BCD436HP and is the answer not in the manual?
General| Model | BCD436HP |
|---|---|
| Antenna | Removable SMA Antenna |
| Close Call RF Capture | Yes |
| Dynamic Memory | Yes |
| PC Programmable | Yes |
| Water Resistance | No |
| Category | Scanner Radio |
| Display | Dot-matrix LCD |
| Power Source | 3x AA batteries or USB power |
| Weight | 10.1 oz |
| Type | Handheld |
| GPS | Optional GPS receiver supported |
| Audio Output | Earphone jack (3.5 mm) |
| Trunking Systems Supported | Motorola, EDACS, LTR, APCO 25 Phase I and Phase II |
| Modulation Types | AM, FM, NFM, P25 |
| Battery Life | Varies with usage |
| Display Type | LCD |
| USB Port | Yes |
| SD Card Slot | Yes |
| Frequency Range | 25-512 MHz, 758-960 MHz, 1240-1300 MHz |
Explains how the scanner uses location for scanning and database access.
Details the types of communications the scanner can monitor, including agencies and alerts.
How to create favorites lists, avoid, replay, and record transmissions.
Creating and managing scanner profiles for different locations or preferences.
Features like no programming required, scan by location, and range control.
Supports Trunk Tracker V, APCO 25, Wi-Fi dongle, and instant replay.
Covers PC programming, band defaults, data naming, and custom searches.
Setting custom alerts, LED colors, and broadcast screen options.
Important considerations regarding power supply, antenna, and speaker connections.
Procedures for setting up as a base station and installing in a vehicle.
How to use and charge internal batteries for scanner power.
Explains how scanner data is stored using favorites lists, profiles, systems, sites, and departments.
Software for managing scanner profiles, lists, databases, and firmware updates.
Steps for powering on the scanner and setting initial volume and squelch.
Configuring scanner location via zip code, auto-locate, manual input, or GPS.
Explains the function of physical buttons, knobs, and how to navigate menus.
Adjusting screen backlight, dimmer, contrast, and ID format.
Explains the meaning of various indicators and text on the scanner's screen.
Organizing scanner settings and assigning quick keys for efficient operation.
Detailed steps for managing favorites lists, including adding, avoiding, and controlling them.
Configuring system-specific settings like quick keys, avoidance, and hold time.
Setting up site-specific parameters like band plans, frequencies, and modulation.
Setting up and configuring radio departments within systems.
Detailed settings for individual channels, including audio type, alerts, and avoidance.
Setting the channel's service type, scan delay, priority, and avoidance.
Enabling/disabling favorites lists, databases, and managing quick keys for scanning.
Explains various display states, holding modes, and scanning behaviors.
Configuring options for search operations and Close Call detection.
Configuring weather alerts, scans, delay times, and SAME codes.
Setting up the scanner to monitor for specific paging tones and configuring related settings.
Provides solutions for common problems encountered while scanning.
Explains the categorization of radio communications by service type.
Details regarding the product warranty, its limitations, and the claim process.
To Next Page
