Uniden BCD436HP User Manual

28
Key Operations
Rang
BCD536HP
Press to select Range.
Func
Menu
Scroll
Control
BCD436HP
Power/Light
Press and hold to turn the scanner on or off.
BCD436HP
Press to use the backlight.
Func
Press to enter Function mode for 3 seconds.
Function
Press and hold to lock Function mode. Press again to unlock.
BCD436HP
Press and hold to turn on Close Call Only mode.
Press Func then SQ to start Fire Tone-Out.
Scroll
Control
Press Func then Vol turn to adjust the squelch.
Press to select a menu item or save an entry in Menu Mode.
Vol,Squelch
Turn to select characters with Data Naming.
BCD436HP
Press then turn to adjust volume level in Scan Mode.
Press to view battery info in Scan Mode.
Turn to select Scan/Search direction and to continue
Scan/Search in Scan/Search Modes.
Turn to select Channel or Frequency in Hold Mode.
Turn in Channel Hold to scroll Channels/Frequencies.
Turn to select next receivable Weather channel
in Weather Scan.
Turn to select Tone-outs in Tone-out Standby Mode.
Turn in Department Pause to scroll Departments
in Scan Mode.
Turn in System Pause to scroll Systems.

Uniden BCD436HP Specifications

General

Model	BCD436HP
Antenna	Removable SMA Antenna
Close Call RF Capture	Yes
Dynamic Memory	Yes
PC Programmable	Yes
Water Resistance	No
Category	Scanner Radio
Display	Dot-matrix LCD
Power Source	3x AA batteries or USB power
Weight	10.1 oz
Type	Handheld
GPS	Optional GPS receiver supported
Audio Output	Earphone jack (3.5 mm)
Trunking Systems Supported	Motorola, EDACS, LTR, APCO 25 Phase I and Phase II
Modulation Types	AM, FM, NFM, P25
Battery Life	Varies with usage
Display Type	LCD
USB Port	Yes
SD Card Slot	Yes
Frequency Range	25-512 MHz, 758-960 MHz, 1240-1300 MHz