Uniden BCD436HP User Manual

70
Discovery Mode
Trunking Discovery mode allows you to monitor a trunked radio system, logging
system channel activity and recording the audio for channels.
Conventional Discovery mode lets you monitor a range of frequencies, logging
frequencies with activity and recording the audio for frequencies that are not
already known to be in use in your area so that you can more easily identify the
users. This includes frequencies used conventionally as well as in trunked radio
systems.
In both modes you also have the option to compare hits to the Database and log
all hits or just new hits.
If you use the Auto Store option, Discovery will create a new Trunking System
for IDs found for each Session or will create a new Conventional System for
frequencies found for each Session.
You can create and save several sessions with different settings. Every time
you start a session you create a Run that can later be reviewed in the scanner
or the Sentinel software.
New Session
Press Menu then scroll to Discovery and press E/yes.
Scroll to Trunking Discovery or Conventional Discovery and press E/yes.
Scroll to New Session and press E/yes.
Conventional Discovery
Input Session Name - Enter the Name and press E/yes. See Data Naming.
Trunking Discovery
Input System Name - Enter the first few relevant letters of the system and
press E/yes. See Data Naming.
Note: The System must be enabled for scan to input system name.
Select System - Scroll to the System and press E/yes.
Select Site - Scroll to the Site and press E/yes.
Input Session Name - Enter the Name and press E/yes. See Data Naming.

Uniden BCD436HP Specifications

General

Model	BCD436HP
Antenna	Removable SMA Antenna
Close Call RF Capture	Yes
Dynamic Memory	Yes
PC Programmable	Yes
Water Resistance	No
Category	Scanner Radio
Display	Dot-matrix LCD
Power Source	3x AA batteries or USB power
Weight	10.1 oz
Type	Handheld
GPS	Optional GPS receiver supported
Audio Output	Earphone jack (3.5 mm)
Trunking Systems Supported	Motorola, EDACS, LTR, APCO 25 Phase I and Phase II
Modulation Types	AM, FM, NFM, P25
Battery Life	Varies with usage
Display Type	LCD
USB Port	Yes
SD Card Slot	Yes
Frequency Range	25-512 MHz, 758-960 MHz, 1240-1300 MHz