Uniden BCD436HP User Manual

86
Weather Options
Weather Alert This setting turns on weather alert and determines which
types of signals will trigger an alert. See also Program SAME.
Press Channel to hold on any channel/frequency.
Press and hold 6(WX). Press Func then Menu.
Scroll to Weather Alert and press E/yes.
Alert Only - The scanner will scan all the weather channels and immediately
sound a weather alert siren when it detects the 1050 Hz weather alert tone,
then opens the squelch and remains on the weather channel.
SAME 1-5 - The scanner sounds a weather alert siren for any programmed
county(ies), then opens the squelch and remains on the weather channel.
All FIPS - The scanner sounds a weather alert siren for any programmed
county, then opens the squelch and remains on the weather channel.
The scanner will mute and scan only the weather channels.
Warning! If you receive an alert it will be at FULL volume.
Weather Alert
Weather Warning
Review WX Alerts
SAME 1-5 Select for each SAME group.

Uniden BCD436HP Specifications

General

Model	BCD436HP
Antenna	Removable SMA Antenna
Close Call RF Capture	Yes
Dynamic Memory	Yes
PC Programmable	Yes
Water Resistance	No
Category	Scanner Radio
Display	Dot-matrix LCD
Power Source	3x AA batteries or USB power
Weight	10.1 oz
Type	Handheld
GPS	Optional GPS receiver supported
Audio Output	Earphone jack (3.5 mm)
Trunking Systems Supported	Motorola, EDACS, LTR, APCO 25 Phase I and Phase II
Modulation Types	AM, FM, NFM, P25
Battery Life	Varies with usage
Display Type	LCD
USB Port	Yes
SD Card Slot	Yes
Frequency Range	25-512 MHz, 758-960 MHz, 1240-1300 MHz