79
Modulation Press Func then Channel(MOD) for each band.
Press Channel Hold on any frequency. Enter the frequency and press Menu.
Press Channel to release hold.
Frequency Intermediate Exchange - Press Channel to hold on any
frequency. Press Func then 7(IFX) to toggle on or off.
Repeater Frequency - Press Channel to hold on any frequency.
Press Func then press and hold 8(REV).
Replay the Last Transmissions While searching, press Replay.
Press Channel to pause/resume replay.
Turn the Scroll Control to select recordings.
Start/Stop Recording While searching, press Func then Replay.
Displayed Frequency into a Quick Save Department Press E/yes.
You will see Saving to Quick Dept in the display then press E/yes.
The scanner stores the ID into the Quick Save Department.
Displayed Frequency into an Existing Department Press E/yes.
You will see Saving to Quick Dept in the display then press .no.
At Select Department Scroll to the department where you want to store the
frequency and press E/yes.
After storing the frequency, you will be at the Edit Channel menu to complete
the settings for the new channel.
If you don’t want to edit the channel settings or are done editing the channel,
press Avoid to return to searching.
Search Menu - Press Func then Menu.
Close Call Modes To toggle CC Off, CC Pri, or CC DND.
(BCD536HP) Press SQ( ).
(BCD436HP) Press Func then Avoid( ).
Weather Alert Priority Mode Press Channel to hold on any channel.
Press Func then 6(WX) to toggle on or off.
To Next Page
Loading...
Need help?
General
