24
Name any Favorites List, System, Site, Department, Channel, Location, Custom
Search, Recording Session, Tone-Out, or SAME group with up to 64 characters.
To Enter a Character, turn the scroll control until the character you want appears.
To move the cursor to the right, press 6>.
To move the cursor to the left, press <4.
To clear a character, press .no.
To clear all characters, press .no twice.
Press E/yes when finished to exit.
Set Your Location and Range
Enter Zip/Postal Code This will set the center of a zip/postal code as your
location (not your exact location) and a default scan range of 10 miles.
You can then set the range, edit the location name, and save the location.
Press the Zip button. Select your country USA or Canada and press E/yes.
Enter your zip code or see Data Naming to enter a post code.
Auto Locate The Auto Locate feature works by trying to monitor any Motorola
or P25 system in your area that is also in the Radio Reference Database.
The scanner will then set your location based on the system(s) it receives.
This will set the center of the discovered radio tower as your location (not your
exact location) and a default scan range of 30 miles.
You can then set the range, edit the location name, and save the location.
Press Menu then scroll to Set Your Location and press E/yes.
Scroll to Auto Locate and press E/yes.
Press E/yes or .no to accept the location.
Set Manual Location This will set your exact location and a default scan
range of 0 miles. You can then edit the location name and save the location.
Press Menu then scroll to Set Your Location and press E/yes.
Input Latitude Enter your latitude.
Press .no to toggle N or S, and press E/yes.
Input Longitude Enter your longitude.
Press .no to toggle E or W, and press E/yes.
Set Up GPS Sets the location format, serial port baud rate, and units.
DMS:DDD˚MM’SS.ss or DEG:DDD.dddddd.
Off, 4800, 9600, 19200, 38400, 57600, or 115200.
To Next Page
Loading...
Need help?
General
