58
Select Lists to Monitor This setting enables or disables your Favorites Lists
for scanning. You must first enable each list here, before you can enable the
quick key for the list or you will see Nothing to Scan.
Note: You will need to set a location to scan the database.
Scroll to each Favorites List, the Full Database, or Search with Scan and
press E/yes to enable or disable.
For Search with Scan, see also Search with Scan and Edit Custom Search.
Manage Quick Key Status This is one way to enable or disable your
System quick keys and Favorites Lists quick keys. The other way is using the
number keys on the keypad. See Selecting Quick Keys.
Scroll to each Favorites List quick key and press E/yes to enable or disable.
Scroll to each Favorites List and press E/yes.
Scroll to each System quick key and press E/yes to enable or disable.
Set Nationwide Systems (Database Only) This setting enables or disables
Nationwide systems in the Database, only when the Database is being scanned.
Scroll to each Nationwide System and press E/yes to enable or disable.
Set All Lists Off/On These settings turn all Favorites Lists on or off.
Press E/yes to toggle each setting.
Press Menu then scroll to Manage Full Database and press E/yes.
Review Avoids You can review all Systems, Departments, and Channels that
are avoided and stop avoiding each one.
Note: The Database must be enabled for scan to review Avoids.
Scroll to each System, Department, or Channel and press E/yes to stop
avoiding. Temporary Avoids appear reversed in the display- .
Stop All Avoiding This will stop avoiding all Systems, Departments, and
Channels in the Database.
At Confirm Delete? press E/yes or .no.
Information This will show the database version in the scanner.
To Next Page
Loading...
Need help?
General
