Uniden BCD436HP User Manual

74
Search/Close Call Options
These are the settings you should look at before you perform a Quick Search, or
Close Call Search.
Press Menu. Scroll to Srch/CloCall Opt and press E/yes.
Scroll to the options below and press E/yes.
Freq Avoids
Set Delay Time
P25 Waiting Time
Broadcast Screen
Set Attenuator
P25 Threshold Mode
Repeater Find
Set Audio AGC
P25 Threshold Level
Freq Avoids This allows you to review Avoided Frequencies or Stop Avoiding
all Frequencies for Searching and Close Call search.
Temporary Avoids appear reversed in the display- .
Stop All Avoiding See also Search Avoids.
At Confirm Delete? Press E/yes or .no.
Rvw Search Avoid
Scroll to Frequency and press E/yes to Stop Avoiding.
Broadcast Screen Automatically ignores transmissions that are on common
broadcasts, paging systems, and other annoyance radio sources during Custom
Search, Quick Search, or Close Call Search. The default setting is Pager On.
Set All Band On/Off Turns Broadcast Screen On or Off for All Bands.
Set Each Band
Scroll to each Band and press E/yes to enable or disable.
Program Band
Band 1-10 Select for each Close Call Band.
Set Lower/Upper Limit
0-1000 MHz
Press Menu to return and repeat for each band as needed.
Repeater Find Sets whether the scanner tries to tune to a repeater output
frequency when it detects a transmission on a repeater input frequency, in Search
and Close Call modes. Turning this feature on can let you hear both sides of the
conversation on the output frequency. The default setting is Off.
On or Off

Uniden BCD436HP Specifications

General

Model	BCD436HP
Antenna	Removable SMA Antenna
Close Call RF Capture	Yes
Dynamic Memory	Yes
PC Programmable	Yes
Water Resistance	No
Category	Scanner Radio
Display	Dot-matrix LCD
Power Source	3x AA batteries or USB power
Weight	10.1 oz
Type	Handheld
GPS	Optional GPS receiver supported
Audio Output	Earphone jack (3.5 mm)
Trunking Systems Supported	Motorola, EDACS, LTR, APCO 25 Phase I and Phase II
Modulation Types	AM, FM, NFM, P25
Battery Life	Varies with usage
Display Type	LCD
USB Port	Yes
SD Card Slot	Yes
Frequency Range	25-512 MHz, 758-960 MHz, 1240-1300 MHz