EasyManuals Logo

Uniden BCD436HP User Manual

Uniden BCD436HP
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
38
Settings Menu
Set Time
Set Hour Enter the Hour (0-23).
Set Minute Enter the minute.
Set Time Zone
Scroll to your time zone.
Daylight Saving
On or Off.
Replay Options This allows you to set the recording duration and delete or
rename recording sessions.
Set Replay Duration
30, 60, 90, 120, 150, 180, 210, or 240 sec.
Review Recordings
Recording Session
Play Session. See Replaying Transmissions.
Delete Session
At Confirm Delete? Press E/yes or .no.
Rename Session See Data Naming.
Restore Options Allows you to clear all user data (full reset) or reset just
profile settings to default.
Clear User Data
(Full Reset) will delete all Favorites Lists, locations, reset all profile options to
default, clear all Avoids, delete all recording sessions, all discovery logs, and
all weather event records.
Note: Pressing and holding 2, 9, and Dept when you power on the
scanner will also clear all user data.
Reset User Settings
Will only reset all profile settings and Favorites List will be saved.
See Scanner Info This will show you how much memory is in use, the
firmware version, and scanner serial number.
Keypad Lock (BCD436HP Only) The only keys/knobs that work are Channel,
Dept, System for hold mode, Func, and the Scroll Control for volume.
Press Channel to hold and press Func then to toggle the keypad lock.
View the Battery Level (BCD436HP Only)
To view the battery level (in volts) press the scroll control and look at the small
numbers in the upper right of the display. Press the scroll control again to close
the volume level or let it disappear after 10 seconds.

Table of Contents

Other manuals for Uniden BCD436HP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Uniden BCD436HP and is the answer not in the manual?

Uniden BCD436HP Specifications

General IconGeneral
ModelBCD436HP
AntennaRemovable SMA Antenna
Close Call RF CaptureYes
Dynamic MemoryYes
PC ProgrammableYes
Water ResistanceNo
CategoryScanner Radio
DisplayDot-matrix LCD
Power Source3x AA batteries or USB power
Weight10.1 oz
TypeHandheld
GPSOptional GPS receiver supported
Audio OutputEarphone jack (3.5 mm)
Trunking Systems SupportedMotorola, EDACS, LTR, APCO 25 Phase I and Phase II
Modulation TypesAM, FM, NFM, P25
Battery LifeVaries with usage
Display TypeLCD
USB PortYes
SD Card SlotYes
Frequency Range25-512 MHz, 758-960 MHz, 1240-1300 MHz

Related product manuals