EasyManuals Logo

Uniden BCD436HP User Manual

Uniden BCD436HP
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
54
Programming Frequencies/TGIDs
Quickly Storing a Frequency/ID
In scan mode press Channel to hold on any channel.
Enter the Frequency or ID and press E/yes. See also Edit Frequency/ID.
Note: You have to enter an ID/frequency in the proper format for the system
you are holding on. Example: You can’t enter a Motorola Type II ID when
holding on an LTR system.
Program a Frequency/ID into a “Quick Save” Favorites List
At Quick Freq/TGID Save? Press E/yes.
The scanner will save the Frequency/ID in a Favorites List called Quick
Save Favorites List, in a System called Quick Save System, (with no quick
keys assigned), in a Department called Quick Save Department.
Program a Frequency/ID into a Current Favorites List
At Quick Freq/TGID Save? Press .no.
At Select System Scroll to the System where you want to store the
Frequency/ID and press E/yes.
At Select Department Scroll to the Department where you want to store the
Frequency/ID and press E/yes.
After storing the Frequency/ID, you will be at the Channel Options menu to
complete the settings for the new channel. If you don’t want to edit the channel
settings press Avoid to return.
New Channel/Channel Options
Press Menu then scroll to Manage Favorites and press E/yes.
Scroll to the Favorites List and press E/yes.
Scroll to Review/Edit System and press E/yes.
Scroll to the System and press E/yes.
Scroll to Edit Department and press E/yes.
Scroll to the Department and press E/yes.
Scroll to Edit Channel and press E/yes.
To Create a New Channel scroll to New Channel and press E/yes.
At Input Frequency/TGID enter the frequency or ID and press E/yes.
To Edit an Existing Channel scroll to the Channel and press E/yes.

Table of Contents

Other manuals for Uniden BCD436HP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Uniden BCD436HP and is the answer not in the manual?

Uniden BCD436HP Specifications

General IconGeneral
ModelBCD436HP
AntennaRemovable SMA Antenna
Close Call RF CaptureYes
Dynamic MemoryYes
PC ProgrammableYes
Water ResistanceNo
CategoryScanner Radio
DisplayDot-matrix LCD
Power Source3x AA batteries or USB power
Weight10.1 oz
TypeHandheld
GPSOptional GPS receiver supported
Audio OutputEarphone jack (3.5 mm)
Trunking Systems SupportedMotorola, EDACS, LTR, APCO 25 Phase I and Phase II
Modulation TypesAM, FM, NFM, P25
Battery LifeVaries with usage
Display TypeLCD
USB PortYes
SD Card SlotYes
Frequency Range25-512 MHz, 758-960 MHz, 1240-1300 MHz

Related product manuals