65
Avoiding Channels, Departments, and Systems.
Temporary Avoid cancels when you cycle power. See also Reviewing Avoids.
Channel Avoid - Press Avoid once to Temporary Avoid.
Press quickly to toggle Permanent Avoid and Stop Avoiding when the
channel is in the display or in Channel Hold mode.
Department Avoid - Press Dept then Avoid once to Temporary Avoid.
Press Avoid quickly to toggle Permanent Avoid and Stop Avoiding.
System Avoid - Press System then Avoid once to Temporary Avoid.
Press Avoid quickly to toggle Permanent Avoid and Stop Avoiding.
Channel Attenuation - Press Channel to hold on the channel and press Func
then 4(ATT) to toggle attenuation.
Global Attenuation - Press Channel to hold on any channel then press and
hold Func then 4(ATT) to toggle global attenuation.
Conventional Channel Modulation - Press Channel to hold on the channel.
Press Func then Channel(MOD) to toggle modulation.
Press Channel to release hold mode.
Site Modulation - Press Func then Dept to hold on a Site.
Press Channel to hold on any channel.
Press Func then Channel(MOD) to toggle modulation.
Press Channel to release hold mode.
Press Func then Dept to release Site hold mode.
Intermediate Frequency Exchange - Press Channel to hold on the
channel. Press Func then 7(IFX) to toggle on or off.
Repeater Frequency Conventional Channel - Press Channel to hold
on the channel. Press Func then press and hold 8(REV).
Channel Volume Offset - Press Channel to hold on the channel.
Press Func then press 0(LVL) to toggle.
To Next Page
Loading...
Need help?
General
