67
CTCSS Tone or DCS/NAC Code (blinking)
Press E/yes when the Channel is in the display.
Scroll to Save Sub Audio and press E/yes. At Confirm? press E/yes or .no.
Displayed ID into an Existing Department
Press E/yes when the Channel is in the display.
You will see Saving to Quick Dept in the display then press .no.
At Select Department Scroll to the department where you want to store the ID
and press E/yes.
Displayed ID into a Quick Save Department
Press E/yes when the Channel is in the display.
You will see Saving to Quick Dept in the display then press E/yes.
The scanner stores the ID into the Quick Save Department.
After storing the ID, you will be at the Edit Channel menu to complete the
settings for the new channel.
If you don’t want to edit the channel settings or are done editing the channel,
press Avoid to return to scanning.
Close Call Modes To toggle CC Off, CC Pri, or CC DND.
(BCD536HP) Press SQ( ).
(BCD436HP) Hold on any channel and press Func then Avoid( ).
Priority Modes Press Func then .no(PRI) to toggle
Priority Mode Off, Pri, or DND.
Weather Alert Priority Press Channel to hold on any channel.
Press Func then 6(WX) to toggle on or off.
Custom Search Press Channel to hold on any channel.
Press Func then 1(SRCH1), 2(SRCH2), or 3(SRCH3), to start a Custom Search
assigned to a Search Key.
Close Call Only (BCD536HP) Press and hold SQ.
(BCD436HP) Press Func then press and hold Avoid.
Weather Scan Press Channel to hold on any channel.
Press Func then press and hold 6(WX).
(BCD536HP Only) Press Channel to hold on any channel.
Press Func then SQ.
(BCD436HP) Assign Tone-Out Standby/Search to a Search Key.
To Next Page
Loading...
Need help?
General
