Uniden BCD436HP User Manual

48
System Options
P25 Waiting Time (Conventional Only) This setting gives the scanner time
to determine if channels on Conventional Systems have digital or analog
transmissions. During this time, the scanner will evaluate the received signal and,
if it detects digital data, will open squelch immediately. If digital is not detected
before the delay expires, the scanner will open squelch at the end of this delay.
This is to prevent "false decode" problems. This setting only affects conventional
channels with an Audio Type set to All. The default setting is 400 ms.
0 to 1000
Note: Any analog transmissions will lose the first part of the transmission, up
to the wait time you set here.
P25 Threshold Mode (Conventional Only) The default setting is Auto.
Auto -
Manual -
Default -
P25 Threshold Level (Conventional Only) The default setting is 8.
1 to 20
Programming Sites
New Site/Site Options
Press Menu then scroll to Manage Favorites and press E/yes.
Scroll to the Favorites List and press E/yes.
Scroll to Review/Edit System and press E/yes.
Scroll to the System and press E/yes.
Scroll to Edit Site and press E/yes.
Scroll to New Site and press E/yes
To Create a New Site scroll to New Site and press E/yes.
To Edit an Existing Site scroll to the Site and press E/yes.
Note: Not all options will appear for all sites.
Edit Name
Set Modulation
P25 Threshold Mode
Set Site Type
Set Attenuator
P25 Threshold Level
Edit Band Plan
Set Avoid
Delete Site
Set Frequencies
Set Location Information
New Site
P25 Waiting Time

Uniden BCD436HP Specifications

General

Model	BCD436HP
Antenna	Removable SMA Antenna
Close Call RF Capture	Yes
Dynamic Memory	Yes
PC Programmable	Yes
Water Resistance	No
Category	Scanner Radio
Display	Dot-matrix LCD
Power Source	3x AA batteries or USB power
Weight	10.1 oz
Type	Handheld
GPS	Optional GPS receiver supported
Audio Output	Earphone jack (3.5 mm)
Trunking Systems Supported	Motorola, EDACS, LTR, APCO 25 Phase I and Phase II
Modulation Types	AM, FM, NFM, P25
Battery Life	Varies with usage
Display Type	LCD
USB Port	Yes
SD Card Slot	Yes
Frequency Range	25-512 MHz, 758-960 MHz, 1240-1300 MHz