Uniden BCD436HP User Manual

47
System Options
Emergency Alert (Motorola/EDACS Only) This sets how your scanner alerts
you to IDs that have the emergency flag set. The default setting is Off.
Set Alert Tone
Alert 1-9 or Off.
Set Level
Level 1-15 or Auto (the master volume level).
Set Alert Light
Set Color
Off, Blue, Red, Magenta, Green, Cyan, Yellow, or White.
Set Pattern
On, Slow Blink, or Fast Blink.
Review ID Avoids This allows you to review Avoided IDs in the System.
Temporary Avoids appear reversed in the display- .
Stop Avoiding? Scroll to ID and press E/yes to Stop Avoiding.
Nothing Avoided appears if nothing is Avoided.
Clear All ID Avoids This allows you to Stop Avoiding all Avoided IDs in the
System.
At Confirm? press E/yes or .no.
Nothing Avoided appears if nothing is Avoided.
Set Audio AGC This allows you to turn AGC (Automatic Gain Control) on or
off for the System. The default settings are Off.
Analog - Press E/yes to toggle On or Off.
Digital - Press E/yes to toggle On or Off.
P25 NAC Option (P25-1Tr Only) This allows you to have the scanner search
for NAC codes or you can program a specific code for the System.
The default setting is Off.
Search - The scanner opens squelch for any digital signal and displays the
NAC being used.
Set P25 NAC - The scanner opens squelch only for signals that include the
programmed NAC.
At Input P25 NAC see Data Naming.

Uniden BCD436HP Specifications

General

Model	BCD436HP
Antenna	Removable SMA Antenna
Close Call RF Capture	Yes
Dynamic Memory	Yes
PC Programmable	Yes
Water Resistance	No
Category	Scanner Radio
Display	Dot-matrix LCD
Power Source	3x AA batteries or USB power
Weight	10.1 oz
Type	Handheld
GPS	Optional GPS receiver supported
Audio Output	Earphone jack (3.5 mm)
Trunking Systems Supported	Motorola, EDACS, LTR, APCO 25 Phase I and Phase II
Modulation Types	AM, FM, NFM, P25
Battery Life	Varies with usage
Display Type	LCD
USB Port	Yes
SD Card Slot	Yes
Frequency Range	25-512 MHz, 758-960 MHz, 1240-1300 MHz