36
4th Line – 3 Line Display Off
Department Name and Avoid/Hold status in Receiving or Hold Modes.
Temporary Avoids appear reversed in the display- .
Custom Search Name appears in Search with Scan.
Site Name for a trunked system or Department Name for a conventional system
in Scan Mode.
Department Name for a system in Receiving or Hold Modes.
Search Frequency and Modulation in Search Mode.
5th Line – 3 Line Display Off
Scanning for a conventional system, ID Scanning/Searching for a trunked
system in Scan Mode.
Channel Name in Receiving or Hold Modes.
6th Line – 3 Line Display Off
appears when receiving a priority channel in Receiving or Hold Modes.
Channel Service Type in Receiving or Hold Modes.
TGID in Receiving or Hold Modes for a trunked site.
Tone/Code for a conventional channel in Receiving or Hold Modes.
Blinking Tone/Code indicates Tone/Code Search.
HOLD shows channel Avoid/Hold status.
Temporary Avoids appear reversed in the display- .
7th Line – 3 Line Display Off
Unit ID for a trunked system in Receiving or Hold Modes.
Frequency and Modulation for a conventional channel
in Receiving or Hold Modes.
Favorites List Name or Full Database in Scan Mode.
SCR appears if one or more broadcast/custom screen bands are turned on
in Receiving or Search Modes.
REP appears if Repeater Find is enabled in Receiving or Search Modes.
Number Tag Information in Function Mode for a Favorites List.