Uniden BCD436HP User Manual

26
Set Your Location and Range
Save Location This will save the current location, the range, and set the
location as current for scanning the Database and Favorites Lists with Location
Control enabled.
See Data Naming to name the location.
Selecting Service Types
Not all service types are enabled when you create a new profile or when you set
your location in the scanner. By default only EMS Dispatch, Fire Dispatch, Law
Dispatch, and Multi-Dispatch are enabled.
The Appendix has a list of Service Types and their general descriptions.
(BCD536HP) Press the Serv button.
(BCD436HP) Press Func then the Zip/Services button.
Scroll to each Service Type and press E/yes to enable or disable.
Press System to exit.
When the scanner displays a Service Type that is not in the Favorite Lists, the
scanner will display a "---" indication.
Keypad and Knob Controls
BCD536HP
Key Operations
Power/VOL
Turns the scanner on/off and adjusts the volume.
Press to toggle backlight intensities.
Light
BCD536HP
Press Func then to lock or unlock the keypad.

Uniden BCD436HP Specifications

General

Model	BCD436HP
Antenna	Removable SMA Antenna
Close Call RF Capture	Yes
Dynamic Memory	Yes
PC Programmable	Yes
Water Resistance	No
Category	Scanner Radio
Display	Dot-matrix LCD
Power Source	3x AA batteries or USB power
Weight	10.1 oz
Type	Handheld
GPS	Optional GPS receiver supported
Audio Output	Earphone jack (3.5 mm)
Trunking Systems Supported	Motorola, EDACS, LTR, APCO 25 Phase I and Phase II
Modulation Types	AM, FM, NFM, P25
Battery Life	Varies with usage
Display Type	LCD
USB Port	Yes
SD Card Slot	Yes
Frequency Range	25-512 MHz, 758-960 MHz, 1240-1300 MHz