Uniden BCD436HP User Manual

83
Using Close Call
Close Call Hit
Attenuation Press Func then 4(ATT) for all bands.
Modulation Press Func then Channel(MOD) for all bands.
Quick Search
Press Channel Hold on any frequency. Turn the Scroll Control.
Press Channel to release hold.
Intermediate Frequency Exchange - Press Channel to hold on any
frequency. Press Func then 7(IFX) to toggle on or off.
Repeater Frequency - Press Channel to hold on any frequency.
Press Func then press and hold 8(REV).
Replay the Last Transmissions Press Replay.
Press Channel to pause/resume replay.
Turn the Scroll Control to select recordings.
Start/Stop Recording Press Func then Replay.
Storing
Displayed Frequency into a Quick Save Department Press E/yes.
You will see Saving to Quick Dept in the display then press E/yes.
The scanner stores the ID into the Quick Save Department.
Displayed Frequency into an Existing Department Press E/yes.
You will see Saving to Quick Dept in the display then press .no.
At Select Department Scroll to the department where you want to store the
frequency and press E/yes.
After storing the frequency, you will be at the Edit Channel menu to complete
the settings for the new channel.
If you don’t want to edit the channel settings or are done editing the channel,
press Avoid to return to searching.
Close Call Menu - Press Func then Menu.

Uniden BCD436HP Specifications

General

Model	BCD436HP
Antenna	Removable SMA Antenna
Close Call RF Capture	Yes
Dynamic Memory	Yes
PC Programmable	Yes
Water Resistance	No
Category	Scanner Radio
Display	Dot-matrix LCD
Power Source	3x AA batteries or USB power
Weight	10.1 oz
Type	Handheld
GPS	Optional GPS receiver supported
Audio Output	Earphone jack (3.5 mm)
Trunking Systems Supported	Motorola, EDACS, LTR, APCO 25 Phase I and Phase II
Modulation Types	AM, FM, NFM, P25
Battery Life	Varies with usage
Display Type	LCD
USB Port	Yes
SD Card Slot	Yes
Frequency Range	25-512 MHz, 758-960 MHz, 1240-1300 MHz