28
Dialing In to Your System
1. Call your phone number & wait until the system answers. (If the system is
turned off, it answers after 10 rings & sounds a series of beeps.)
2. During the greeting or beeps, press
“#”
and immediately enter your
security code. If you enter it incorrectly 3 times, the system hangs up and
returns to standby.
3. The system announces the time, the number
of messages in memory, and a help prompt. It beeps to let you know it’s
waiting for a command.
4. When you hear
beeping, enter a
2-digit command
from the chart.
#1 Repeat message #5 Stop playback
#2 Play message #6 Turn the system on
#3 Skip message #9 Turn the system off
#4 Delete message #0 Hear help prompts
# If you don’t press any keys for 15 seconds, the phone will hang up and
return to standby.
To Next Page
Loading...
Need help?
General
