6
Setting Up the MobileLink Bluetooth Connection
The new DECT 3236 with MobileLink technology can connect with mobile
phones that support the Bluetooth V2.1 handsfree profile.
If you are not certain of the profiles supported by your Bluetooth phone or
if you have difficulty pairing your phone to the DECT 3236 see the manual
that came with your phone.
With the MobileLink feature, you can essentially treat your mobile phone as
a second line. You can use the DECT 3236 handset to make and receive
calls on your mobile phone number, put mobile calls on hold, and transfer
calls to other handsets. See page 7 for more information.
Bluetooth wireless devices have a maximum range of about 10m (33 feet);
the actual range will vary depending on local conditions (obstacles, battery
power, interference, etc.).
Pair your Bluetooth phone
Pairing “introduces” the Bluetooth device and DECT 3236 and gives them
permission to connect to each other. In most cases, once you pair a phone
to the DECT 3236, these two devices connect automatically whenever they
detect each other. (If you have to manually reconnect each time, check
the Bluetooth settings on your mobile phone.) You can pair your Bluetooth
devices through the DECT 3236 handset.
1. Press MENU/SELECT to display the handset’s main menu.
2. Select the Bluetooth Setup menu, then select the Add Mobile submenu.
The base goes into pairing mode when the handset displays Search &
select from Mobile DECT 3236 PIN: 0000.
3. On your Bluetooth phone, start a search for other Bluetooth devices.
(This process may take several seconds and it will be different for each
mobile phone. See your phone owner’s manual for detailed instructions.)
4. Your phone should discover a device called DECT 3236 or Handsfree
device. When your phone asks if you want to pair with this device,
answer yes.
5. If your phone prompts you for a PIN code or password to pair with the
DECT 3236 enter 0000 (four zeroes).
6. When your phone accepts the Bluetooth connection, the DECT 3236
sounds a confirmation tone. The Bluetooth device number icon on the
base and the handset display light up.
To Next Page
Loading...
