35
Using Caller ID, Call
Waiting, and Redial Lists
Using Call Waiting
If you have Call Waiting service and a second call comes in when you are on the
phone, a call waiting tone will sound. Press TALK/FLASH to accept the waiting call.
There is a short pause, and then you will hear the new caller. To return to the original
caller, press TALK/FLASH.
Note: You must subscribe to Call Waiting service for this feature to operate. Not all
features are available in all areas.
Redialing a Number
You can quickly redial the last ve numbers dialed on each handset.
With the phone in standby, press the REDIAL/PAUSE to open the redial list.
Use and or REDIAL/PAUSE to scroll through the redial list.
When you nd the number you want to dial, press TALK/FLASH or .
Notes: • If the number exceeds 32 digits, only the rst 32 digits are retained in redial memory.
• If the redial memory is empty, Empty appears in the display and you will hear a beep.
• You can also press TALK/FLASH or before you open the redial list. Find the phone number you want to
dial, and then press MENU/SELECT.
Deleting a Redial Record
If you want to delete a phone number from the redial list, follow the steps below:
With the phone in standby, press REDIAL/PAUSE.
Use and to scroll through the redial list.
When you nd the redial number you want to delete, press MENU/SELECT and select Delete Entry.
When the phone asks you to conrm, select Yes. The redial number is deleted.
1)
2)
3)
1)
2)
3)
4)
To Next Page
Loading...
Need help?
General
