39
Using Hold, Conference
and Transfer
When another handset accepts the transferred call, you will be disconnected. If you want to rejoin the call, press
TALK/FLASH or
again.
Answering a transferred call
When a handset receives a call transfer, it sounds a paging tone; handsets also show the ID of the handset that is
paging. To accept the call transfer:
To answer the page and speak to the transferring handset, press TALK/FLASH or CLEAR/INT’COM.
Note: If AutoTalk is on, the handset will automatically answer the page when you pick up the handset from the
cradle. If Any Key Answer is on, you can also press any key on the handset’s dial pad.
To accept the call and speak to the caller, press TALK/FLASH on the receiving handset.
When you accept the transferred call, the transferring handset will be disconnected.
Only the fi rst handset to answer the transfer page will be connected to the call. If the transfer page is not picked up
within one minute, the operation will be canceled.
3.
1.
2.
3.
DECT 2035+1 OM.indb 39DECT 2035+1 OM.indb 39 15/7/08 12:00:27 PM15/7/08 12:00:27 PM
To Next Page
Loading...
Need help?
General
