Uniden DXAI4288-2 User Manual (English)

Other manuals for Uniden DXAI4288-2

Questions and Answers:

A
Amy SmithAug 19, 2025
Why doesn't my Uniden DXAI4288-2 Cordless Telephone handset ring or receive a page?
- T
  Tracy GillespieSep 12, 2025
  If your Uniden Cordless Telephone handset doesn't ring or receive a page, consider these solutions: * Re-register both handsets. * Charge the battery for 15-20 hours if the battery pack is weak. * Move the main base away from appliances or metal objects if the handset is too far from the main base. * Change the digital security code. * Check the battery pack to ensure there is a secure connection. * Make sure the ringer volume isn't set to "off."
K
Katherine FarmerAug 21, 2025
How to fix weak or scratchy audio on Uniden DXAI4288-2?
- J
  Julian MurrayAug 21, 2025
  If the audio on your Uniden Cordless Telephone sounds weak or scratchy: * Move the handset and/or main base away from metal objects or appliances and try again. * Press the select/channel key in the talk mode to help eliminate background noise. * Make sure that the handset is not too far from the main base.
C
Cynthia MilesAug 23, 2025
What to do if charge LED doesn't illuminate on my Uniden DXAI4288-2?
- B
  Barbara MillerAug 23, 2025
  If the charge/in use LED or charge LED won't illuminate when the handset of your Uniden Cordless Telephone is placed in the cradle: * Make sure the AC adapter is plugged into the cradle and wall outlet. * Make sure the handset is properly seated in the cradle. * Make sure the charging contacts on the handsets are clean.
P
pedwardsAug 26, 2025
Why can't I make or receive calls on my Uniden Cordless Telephone?
- K
  kaitlin59Aug 26, 2025
  If you cannot make or receive calls on your Uniden Cordless Telephone, try the following: * Re-register both handsets. * Check both ends of the telephone line cord. * Make sure the AC adapter is plugged into the main base and wall outlet. * Disconnect the AC adapter for a few minutes, then reconnect it. * Change the digital security code.
N
nicoleallisonAug 27, 2025
Why does Caller ID not display on my Uniden DXAI4288-2?
- T
  Tammie HuntAug 28, 2025
  The Caller ID may not display on your Uniden Cordless Telephone if the call was answered before the second ring or was placed through a switchboard. You can also try charging the handset. If the issue persists, your Caller ID service may not be active, so contact your local telephone service provider.
J
Joel MedinaAug 30, 2025
Why is my Uniden Cordless Telephone answering system not recording messages?
- A
  Anna PerezAug 30, 2025
  If the answering system on your Uniden Cordless Telephone does not record messages, set the record time to either the one minute or four minute option. Also, the memory may be full, so delete some or all of the saved messages.
K
kstricklandSep 1, 2025
How to stop noise interference on Uniden Cordless Telephone?
- E
  Eric BrownSep 1, 2025
  To resolve severe noise interference with your Uniden Cordless Telephone, keep both handsets away from microwave ovens, computers, remote control toys, wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical appliances. Alternatively, move the main base to another location or turn off the source of interference.
J
Jorge PatelSep 3, 2025
Why are messages incomplete on my Uniden Cordless Telephone?
- M
  Mark McdonaldSep 3, 2025
  If messages are incomplete on your Uniden Cordless Telephone, remind callers to leave a brief message. Also, the memory may be full, so delete some or all of the saved messages.
E
Edgar HubbardSep 5, 2025
What to do if my Uniden DXAI4288-2 Cordless Telephone handset doesn't communicate with the base?
- A
  Ann ReynoldsSep 5, 2025
  If the handset of your Uniden Cordless Telephone doesn’t communicate with the main base or the other handset, re-register both handsets.
S
Sabrina HansonSep 7, 2025
What to do if liquid entered the plastic housing of my Uniden Cordless Telephone base?
- J
  Jessica WhiteSep 7, 2025
  If moisture or liquid has entered the plastic housing of your Uniden Cordless Telephone base unit: * Disconnect the AC adapter from the base unit, cutting off electrical power. * Disconnect the telephone cord from the base unit. * Let dry for at least 3 days.

Uniden DXAI4288-2 Specifications

General

Type	Cordless Telephone
Number of Handsets	2
Caller ID	Yes
Call Waiting	Yes
Battery Type	NiMH
Talk Time	Up to 10 hours
Standby Time	Up to 7 days
Speakerphone	Yes
Intercom	Yes
Headset Jack	Yes
Backlit Display	Yes
Power Source	AC Adapter
Frequency	DECT 6.0