Uniden DXAI4288-2 User Manual

68 pages

To Next Page

DXAI 4288-2

Default Chapter2
- Table of Contents2
Welcome/Features3
Controls and Functions4
Terms Used in this Manual6
Accessibility7
Installing the Phone8
- Choose the Best Location8
- Install the Rechargeable Battery Packs into the Handsets9
- Connect the Main Base and Charging Cradle, and Charge the Handsets10
- Mount the Main Base on a Wall11
- Installing the Beltclip12
- Headset Installation13
Register Handsets to the Main Base before Using14
When to Re-Register Handsets15
Basic Setup16
- Activating Autotalk16
- Activating Caller ID on Call Waiting16
- Entering Your Area Code17
- Choosing the Dialing Mode18
- Setting the Language19
- Selecting the Ring Tone and Volume19
Using Your Phone20
- Making and Receiving Calls20
- Transferring a Call21
- Redialing the Last Dialed Number21
- Adjusting the Earpiece Volume22
- Tone Dialing Switch-Over22
- Traveling Out-Of-Range23
- Selecting a Different Channel23
- Find Handsets23
- Using Call Waiting24
Using the Speed Dial Memory25
- Storing Names and Numbers in Speed Dial Memory25
- Storing Caller ID Messages in Speed Dial Memory28
- Making Calls from Speed Dial Memory29
Caller ID and CIDCW (Caller ID on Call Waiting)30
- Viewing the Caller ID Message List31
- Deleting Information from the Caller ID List32
- Making a Call from the Caller ID List33
- Caller ID on Call Waiting (CIDCW)33
The Integrated Answering Device34
Setting up Your Answering System35
- Setting the Time36
- Setting the Ring Time38
- Selecting the Message Record Time39
- Setting the Message Alert Tone39
- Selecting the Language40
- Turning the Answering System On/Off44
Using Your Answering System45
- Repeating a Message46
- Skipping a Message47
- Deleting a Message48
- Voice Memo49
- Remote Operation50
- Turn on the Answering System Remotely52
Changing the Digital Security Code53
Note on Power Sources54
General Information56
Troubleshooting57
- Liquid Damage60
Precautions & Warranty61
- One Year Limited Warranty62
- Radio Interference62
I.C. Notice63
Index64
Remote Operation Card65

Other manuals for Uniden DXAI4288-2

User Guide72 pages

Questions and Answers:

S
sandraphillipsSep 9, 2025
What to do if liquid entered the plastic housing of my Uniden Cordless Telephone handset?
- B
  Belinda OwenSep 9, 2025
  If moisture or liquid has entered the plastic housing of your Uniden Cordless Telephone handset: * Remove the battery cover and leave it off for ventilation. * Remove the battery pack by disconnecting it. * Leave the battery cover off and the battery pack disconnected for at least 3 days. * Once the handset is completely dry, reconnect the battery pack and the battery cover. * Recharge the handset’s battery pack for 20 hours before using again.
F
Frank ColemanSep 12, 2025
Why is there no sound on the main base speaker of my Uniden DXAI4288-2 Cordless Telephone?
- M
  Michelle JenkinsSep 12, 2025
  If there is no sound on the main base speaker of your Uniden Cordless Telephone during call monitoring, adjust the speaker volume on the main base.

Uniden DXAI4288-2 Specifications

General

Type	Cordless Telephone
Number of Handsets	2
Caller ID	Yes
Call Waiting	Yes
Battery Type	NiMH
Talk Time	Up to 10 hours
Standby Time	Up to 7 days
Speakerphone	Yes
Intercom	Yes
Headset Jack	Yes
Backlit Display	Yes
Power Source	AC Adapter
Frequency	DECT 6.0