Uniden EWCI 936 Series User Manual (English)

Questions and Answers:

J
Jesse EdwardsAug 12, 2025
Why doesn't my Uniden Cordless Telephone ring or receive a page?
- P
  paulhornAug 12, 2025
  If your Uniden Cordless Telephone handset doesn't ring or receive a page, the battery pack might be weak. Charge the battery for 15-20 hours. Also, the handset may be too far from the base unit. Place the base unit away from appliances or metal objects. Also, check the battery pack to ensure there is a secure connection. Ensure the ringer volume isn't turned "off" and charge the handset.
M
melissaperezAug 16, 2025
How to fix voice message indication on Uniden EWCI 936?
- K
  Kelly MercerAug 16, 2025
  To resolve the issue of the Voice Message Indication not working on your Uniden Cordless Telephone, contact your local telephone company to ensure that your telephone receives FSK message signaling. You can also try resetting the indicator by pressing and holding the find handset key for 5 seconds.
C
Carol WalkerAug 20, 2025
What to do if my Uniden Cordless Telephone can't make or receive calls?
- M
  mary40Aug 20, 2025
  If you can't make or receive calls on your Uniden Cordless Telephone, check both ends of the telephone line cord. Ensure the AC adapter is plugged into the base and wall outlet. Try disconnecting the AC adapter for a few minutes, then reconnect it. You might also need to change the digital security code. Also, make sure that the handset is not too far from the base. Check the dialing mode used by your telephone company and charge the handset.
M
Micheal CarterAug 23, 2025
How to fix severe noise interference on Uniden Cordless Telephone?
- E
  emilyduffyAug 25, 2025
  If you are experiencing severe noise interference with your Uniden Cordless Telephone, keep the handset away from microwave ovens, computers, remote control toys, wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical appliances. You can also move to another location or turn off the source of interference. Make sure that the handset is not too far from the base.
A
Alexis HarrisAug 27, 2025
Why does my Uniden Cordless Telephone audio sound weak and scratchy?
- S
  steven80Aug 28, 2025
  If the audio on your Uniden Cordless Telephone sounds weak and/or scratchy, move the handset and/or base away from metal objects or appliances. You can also press the delete/channel key in the Talk mode to help eliminate background noise. Make sure that the handset is not too far from the base.
T
Taylor FranklinAug 31, 2025
How to fix charge LED if it won't illuminate on Uniden EWCI 936?
- S
  Sherry PorterAug 31, 2025
  If the charge/in use LED won't illuminate when the handset is placed in the base of your Uniden Cordless Telephone, make sure the AC adapter is plugged into the base and wall outlet. Also, make sure the handset is properly seated in the base and that the charging contacts on the handset are clean.
D
Dr. Michelle ShawSep 3, 2025
How to fix the outdoor temperature display on my Uniden EWCI 936 Cordless Telephone?
- H
  Holly SanchezSep 4, 2025
  To solve the issue of the outdoor temperature and humidity not appearing on the base display of your Uniden Cordless Telephone, check the battery status of the outdoor weather sensor. If the battery is full, switch the Channel another channel and remove the batteries, then re-install them. If the battery is empty, remove the batteries and install new batteries.
A
Aaron BeckerSep 8, 2025
What to do if Caller ID does not display on Uniden Cordless Telephone?
- M
  Maria BarberSep 8, 2025
  To fix the Caller ID not displaying on your Uniden Cordless Telephone, charge the handset. If the issue persists, your Caller ID service may not be active; contact your local telephone service provider.

Uniden EWCI 936 Series Specifications

General

Frequency	900 MHz
Channels	30
Caller ID	Yes
Call Waiting	Yes
Intercom	Yes
Backlit Display	Yes
Battery Life	7 hours talk time
Answering System	Yes (Digital)
Headset Jack	2.5mm