Specifications
General
Channels: Transmit: 54
Receive: 77 Marine/10 Weather
Controls: On-Off/Volume, Squelch
Status Indicators: TX LED (transmit), SCAN, TRI, U, I, C, HI, LO,
MEM, and WX symbol on LCD Panel
Channel Display: LCD (Dual 7 segment)
Selector Switch: Channel Selector switch
Buttons: WX, 16/9, MEM, H/L, and STEP
Connectors: Antenna, remote speaker, and DC power
Size: 2 1/5"H x 6 2/5"W x 8"L
Weight: 2.4 lbs
Supply Voltage: 13.8V DC negative ground
Standard Accessories: Mounting bracket and hardware, DC power cord,
microphone hanger, spare fuse
Antenna Impedance:
50Ω nominal
Microphone:
Rugged 1kΩ condenser mic element with
coiled cord
Speaker:
1.82 inch, 8Ω
Operating Temperature Range: – 20°C to +50°C (– 4°F to +122°F)
Shock and Vibration: Meets or exceeds EIA standards, RS152B
and RS204C
FCC Approvals: Type accepted under part 80 of the Rules;
meets Great Lakes Agreement and party
boat requirements
Transmitter
Power Output: 1 watt or 25 watt (switch selectable)
Power Requirement: Not rated on LO;
25 watts output: 4.5A@13.8V DC
Modulation:
FM ±5 kHz deviation (FCC designator F3E)
Hum and Noise Signal-to-Noise: 42 dB@300 HZ, 3kHz (nominal)
Audio Distortion: Less than 3% with 3 kHz deviation with 1000 Hz
modulating frequency (nominal)
Spurious Suppression: – 56 dB @ 1 watt, – 65 dB @ 25 watts
Output Power Stabilization: Built-in automatic level control (ALC)
Frequency Range: 156 to 158 mHz
Frequency Stability:
±1.58 kHz @ – 20°C to +50°C
Receiver
Frequency Range: 156 to 163 MHz
Sensitivity:
0.25µV for 12 dB SINAD
0.35µV for 20 dB S/N
Circuit: Dual Conversion Super Heterodyne PLL
Squelch Sensitivity:
0.5µv Threshold
Spurious Response: 60 dB
Adjacent Channel Selectivity:
60 dB @ ±25 kHz
Audio Output Power: 3.0 watts (10% Distortion)
Power Requirement: 230 mA @ 13.8V DC squelched
0.7A @ 13.8V DC at maximum audio output
IF Frequencies: 1st - 16.9 mHz
2nd - 455 kHz
15
C:...MC 1010.vp
Thu Jan 28 14:42:58 1999
Color profile: Disabled
Composite Default screen
To Next Page
Loading...
