10
UNIDEN UH089NB UHF CB Transceiver
Operation
UH089NB
UH089NB
Monitor
Press [MON] to open the squelch and receive all weak signals. Press
[MON] again momentarily to cancel.
Selecting a Channel
Turn the Rotary Channel Selector to select the desired channel.
NOTE
For your reference a list of the available channels,
corresponding frequencies and guidelines for their use is
printed on page 20. For Australia, Channels 05 and 35 are
reserved for Emergency Calls.
Set the LCD Dimmer
Press [DIM] to set the LCD backlight dimmer between high and low.
UH089NB
To Next Page
Loading...
Need help?
General
