Uniden UH5000 User Manual

12
UNIDEN UH5000 UHF CB Transceiver
Operation
Monitor
Press and hold to open the squelch and receive all weak signals.
Press and hold
again to cancel.
Selecting a Channel
Turn the Channel Selector to select the desired channel.
NOTE
For your reference a list of the available channels,
corresponding frequencies and guidelines for their use and
selectionisprintedonpage23.ForAustralia,Channels05
and35arereservedforEmergencyCalls.
Programming the Instant Priority Channel
Turn the Channel Selector to select
the Priority Channel you prefer.
Press and hold [INST] on the
microphone for 2 seconds to store
the new setting.
The
icon appears.

Uniden UH5000 Specifications

General

Brand	Uniden
Model	UH5000
Category	Transceiver
Language	English