Uniden UH5000 User Manual

16
UNIDEN UH5000 UHF CB Transceiver
Operation
2. To deactivate SCAN, press .
Open Scan (OS) Mode
Allows continuous scanning of all selected channels. If an active channel
is found, scanning will stop on that channel. If the received signal
ceases,theunitwillwait3secondsforthesignaltoreturn,otherwise
scanning resumes. After transmission in scan mode, the unit will wait 20
seconds for the signal to return, otherwise scanning resumes. To skip
the active channel, turn the Channel Selector.
Group Scan (GS) Mode & Priority Watch
Includes the accessory feature, Priority Watch, which allows you to
monitor the Instant Priority Channel while scanning.
To use GS Mode Scanning;
1.Press
3times.ScnshowsandtheoS/GSsettingashes.
2. Turn the Channel Selector or press
/ to change the setting to GS.
3.Press
to store the setting.
4.Pressandhold
to save & exit the menu mode.
GSScanningcheckstheInstantPriorityChannelforactivityevery1.5
seconds.

Uniden UH5000 Specifications

General

Brand	Uniden
Model	UH5000
Category	Transceiver
Language	English