14
Operation
To Operate In Duplex Mode (Repeaters)
Handheld UHF-CB Transceiver
The Duplex function enables you to access local repeater stations.
You can only activate Duplex on CH01-CH08 and CH41-CH48.
NOTE
UHF CB Repeaters are used to retransmit or relay your signal. Repeaters
will extend the range of your radio and overcome the shielding effect
caused by solid obstructions.
Eg. CH01 is being used in your area
for repeater use.
1. Press [MENU/MEM] 5 times.
2. Press or to change the selection.
r appears for CH01-CH08 and n appears
for CH41-CH48 when duplex is selected.
3. Press & hold [MENU/MEM] to save and exit.
Contact your retailer for a list of repeaters available in your area.
NOTE
Operation with the aid of a Repeater
UNIDEN UH835S/UH850S