15
Handheld UHF-CB Transceiver
Operation
Transmit Power Select
This radio has two transmit power levels:
Hi: 3.5 Watt (UH835S) / 5.0 Watt (UH850S)
Lo: 1.0 Watt.
To change your transmit power level:
1. Press [MENU/MEM].
2. Press or to change the
setting to Hi or Lo.
3. Press & hold [MENU/MEM] to save and
exit.
Scanning
There are 3 scanning modes;
Open Scan (OS),
Group Scan (GS) and
Master Scan (M.SCN) (a special case of Group Scan).
During SCAN the radio only checks channels or frequencies that are
in the SCAN Memory, which are indicated by the M (memory) icon. The
radio maintains two SCAN Memories; one for Open Scan (OS) mode
and the other for Group Scan (GS) mode, to give you flexibility and allow
you to use the radio more effectively.
Group Scan and Master Scan modes share the same SCAN
NOTE
Memory.
TX Power Low
TX Power High
UNIDEN UH835S/UH850S
Smart-key Function
The smart key [S] provides one touch access to one of these functions; Instant
Channel, Call Tone or Equalizer.
Press & hold [S] to change the smart key function between the three options.
To Next Page
Loading...
Need help?
General
