Operation
Monitor
This feature enables users to listen in for weak signals on the current
channel at the press of a button.
To use monitor,
• For continuous listening.
Press [MON/LOCK].
A beep tone will be heard and
the receiver circuit will stay open, letting
in both the noise & weak signals.
• RX LED flashes green.
• To return to normal receive mode
press [MON/LOCK].
CTCSS
CTCSS is a feature that allows a group
to talk to each other without hearing
other users on the same channel.
1. Select desired channel.
2. Press [MENU/MEM] 3 times.
DCS/CTCSS setting ashes.
3. Press or to change the selection.
4. Press & hold [MENU/MEM] to save and exit.
Select oF to turn DCS/CTCSS off for the selected channel.
NOTE
23
UNIDEN UH835S/UH850S
Handheld UHF-CB Transceiver
To Next Page
Loading...
Need help?
General
