UniFi USW-Flex-Mini User Manual

18/10/21, 11:42
USW-Flex-Mini Quick Start Guide
dl-origin.ubnt.com/qsg/USW-Flex-Mini/USW-Flex-Mini_EN.html
3/8
Ports 2 - 5
Power Port
Reset Button
RJ45 ports support 10/100/1000 Mbps Ethernet connections.
Connect the included Power Adapter to the Power port.
Resets to factory defaults. The device should be running after bootup is
complete. Press and hold the Reset button for about 10 seconds until the LED
starts flashing and then becomes solidly lit. After a few seconds, the LED will
turn off, and the device will automatically reboot.
Connecting Power
OR
Connecting Ethernet
USW-Flex-Mini Quick Start Guide

UniFi USW-Flex-Mini Specifications

General

PoE Input	802.3af/at
Max Power Consumption	5W
Operating Temperature	0 to 40° C (32 to 104° F)
Operating Humidity	10 to 90% Noncondensing
Certifications	CE, FCC, IC
Enclosure Material	Polycarbonate
Total Non-Blocking Throughput	5 Gbps
Switching Capacity	10 Gbps
Forwarding Rate	7.44 Mpps
Management Interface	UniFi Network Application
Ports	5
Power Method	PoE or USB-C
LEDs	System: Status
Jumbo Frame Support	9, 000 Bytes
Supported Voltage Range	44-57V DC (PoE), 5V DC (USB-C)