UniFocus Time Clock - Employee ID and PIN Entry

UniFocus Time Clock Manager Guide| 8
Manual entry of both badge/employee ID number and PIN
If your Time Clock login setup requires that you:
A. Use the touch screen keypad to manually enter your employee ID or badge number.
B. Use the touch screen keypad to manually enter your PIN.
Complete the following steps to log in:
1. Enter your numerical employee ID or badge number using the touch screen keypad.
2. Press the green arrow to continue.
The field clears, and the screen label changes to Enter your PIN.
3. Enter your PIN using the touch screen keypad.
4. Press the green arrow to continue.
The Welcome screen appears.
Note: See the UniFocus Time Clock Employee Guide for information about the Welcome screen and the
various actions you can perform in the Time Clock.